The UTU Micro 9mm Titanium Pistol Suppressor with Neilsen is an ultra-compact duty-focused suppressor engineered to keep the shooter’s noise exposure below 140 dB(A), typically around 138 dB dry with 124 or 147 grain ammunition. Its design allows gel to be added and left in place while holstered, delivering an additional 2–3 dB of sound reduction for extended operational readiness.
This monolithic titanium unit incorporates a Neilsen device, enabling reliable function with most John Browning tilting-barrel pistols such as 1911 and Glock designs. It is optimised for subsonic loads yet remains effective across a wide range of 9mm ammunition and is supplied as a sealed suppressor. Suitable for jacketed bullets only.
Weighing 135 grams and measuring 100 mm in length, the UTU Micro maintains a low-profile 29 mm wide by 38.5 mm high footprint, making it highly concealable for duty carry. It comes complete with Neilsen piston and stainless-steel spring.
Specifications
Weight 135g
Overall length 100mm
Overall diameter 29×38.5mm
Length past muzzle
Standard thread options
M13.5×1 LH
1/2-28
Comes in standard Cerakote Graphite Black, other colours available on request
The UTU Micro Pistol suppressor has a recommended cleaning schedule. Clean pistons, springs, and the suppressor with an ultrasonic cleaner using a 50/50 mixture of Simple Green and water for approximately one hour, then removing and allowing to dry. Lubricate the outside of the piston and spring with high temp lithium grease. Check that the suppressor remains securely threaded every 25 rounds during use.
The UTU Micro 9mm Titanium Pistol Suppressor with Neilsen is an ultra-compact duty-focused suppressor engineered to keep the shooter’s noise exposure below 140 dB(A), typically around 138 dB dry with 124 or 147 grain ammunition. Its design allows gel to be added and left in place while holstered, delivering an additional 2–3 dB of sound reduction for extended operational readiness.
This monolithic titanium unit incorporates a Neilsen device, enabling reliable function with most John Browning tilting-barrel pistols such as 1911 and Glock designs. It is optimised for subsonic loads yet remains effective across a wide range of 9mm ammunition and is supplied as a sealed suppressor. Suitable for jacketed bullets only.
Weighing 135 grams and measuring 100 mm in length, the UTU Micro maintains a low-profile 29 mm wide by 38.5 mm high footprint, making it highly concealable for duty carry. It comes complete with Neilsen piston and stainless-steel spring.
Specifications
Weight 135g
Overall length 100mm
Overall diameter 29×38.5mm
Length past muzzle
Standard thread options
M13.5×1 LH
1/2-28
Comes in standard Cerakote Graphite Black, other colours available on request
The UTU Micro Pistol suppressor has a recommended cleaning schedule. Clean pistons, springs, and the suppressor with an ultrasonic cleaner using a 50/50 mixture of Simple Green and water for approximately one hour, then removing and allowing to dry. Lubricate the outside of the piston and spring with high temp lithium grease. Check that the suppressor remains securely threaded every 25 rounds during use.
