The UTU 9mm Titanium Pistol Suppressor with Neilsen is a compact duty and training focused suppressor, engineered to reduce the shooter’s noise exposure.
This monolithic titanium unit incorporates a Neilsen device, enabling reliable function with most John Browning tilting-barrel pistols such as 1911 and Glock designs. It is optimised for subsonic loads yet remains effective across a wide range of 9mm ammunition and is supplied as a sealed suppressor. Suitable for jacketed bullets only.
Weighing 160 grams and measuring 155 mm in length, the UTU maintains a low-profile 29 mm wide by 38.5 mm high footprint. It comes complete with Neilsen piston and stainless-steel spring, with thread options of 1/2"- 28 TPI RH or M13.5 x 1 LH to suit common pistols.
The UTU Pistol suppressor has a recommended cleaning schedule of 1000 rounds. Clean pistons, springs, and the suppressor with an ultrasonic cleaner using a 50/50 mixture of Simple Green and water for approximately one hour, then removing and allowing to dry. Lubricate the outside of the piston and spring with high temp lithium grease. Check that the suppressor remains securely threaded every 25 rounds during use.
The UTU 9mm Titanium Pistol Suppressor with Neilsen is a compact duty and training focused suppressor, engineered to reduce the shooter’s noise exposure.
This monolithic titanium unit incorporates a Neilsen device, enabling reliable function with most John Browning tilting-barrel pistols such as 1911 and Glock designs. It is optimised for subsonic loads yet remains effective across a wide range of 9mm ammunition and is supplied as a sealed suppressor. Suitable for jacketed bullets only.
Weighing 160 grams and measuring 155 mm in length, the UTU maintains a low-profile 29 mm wide by 38.5 mm high footprint. It comes complete with Neilsen piston and stainless-steel spring, with thread options of 1/2"- 28 TPI RH or M13.5 x 1 LH to suit common pistols.
The UTU Pistol suppressor has a recommended cleaning schedule of 1000 rounds. Clean pistons, springs, and the suppressor with an ultrasonic cleaner using a 50/50 mixture of Simple Green and water for approximately one hour, then removing and allowing to dry. Lubricate the outside of the piston and spring with high temp lithium grease. Check that the suppressor remains securely threaded every 25 rounds during use.
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5